carbon fiber fabric epoxy prepreg cloth roll

The use of thermoplastic materials has had significant growth in recent years. However, with great mechanical requirements, thermoplastics have limitations to their use. To improve these  restrictions, these materials are reinforced to obtain better properties. Polypropylene is one of the  most versatile polymers and is used in almost all modern industries. Thus, the aim of this study is  to create composite materials that offer performance for various industrial fields using carbon fiber fabric reinforcement, which is an inexpensive material widely used by the aerospace, automotive, and marine industries. The samples are produced by the over-injection molding of polypropylene. The investigation is focused on the impact of two critical control parameters in the injection molding
process: temperature and pressure. Twelve experiments have therefore been considered, taking into
account the combination of three factors: the presence or absence of carbon fiber fabric reinforcement, three levels of temperature (200 。C, 220 。C, and 240 。C), and two injection pressures (5000 kPa and  10,000 kPa).  To evaluate the influence of these factors, three analyses were carried out:  first, on  the samples’ shrinkage using a portable metrology-grade 3D laser scanner; second, on the internal  defects using computed tomography (CT); and third, on the mechanical properties with tensile tests. From the results obtained, it is observed that the mold shrinkage fell slightly when PP samples were  reinforced with carbon fiber, with both materials (PP and carbon-fiber-reinforced PP) having linear behavior with temperature. It is also noticed that polypropylene behaves as a crystalline material when processed at higher temperatures and pressures. From tests on the mechanical properties, it  is concluded that the mean yield strength of PP-CF for injection temperatures of 220 。C and 240 。C  represents an increase of 43% compared to the non-reinforced material.


Prepreg storage period：

1 month at 22℃
3 month at 0 ℃
6 month at -18℃